Aqueous Cleaning Systems & Drying Chambers

We are located at:
1061 Bradley Rd.
Westlake, Ohio 44145

Contact us at:
Phone (440) 617-9294
Fax: (440) 617-9296
Toll Free: 1-888-779-0011

E-mail: Click Here




  • Spacious mobile cleaning chamber with recessed turntable. Opening measures 29" wide x 28.5" high, with a total chamber area of 21.5 cu.ft.

  • 250-pound capacity turntable enables technician to rotate items being cleaned without needing to lift and reposition.

  • Removable, side-mounted water modifier/conditioner, with standard garden hose connection, processes water through a specially designed 5 micron sediment filter, hydro-magnetic softener and de-ionization system, and finally an instantaneous heater to provide technician a constant source of pure, softened, modified de-ionized hot water.

  • Built-in air gun allows the technician a convenient means to remove surface contaminants before cleaning, as well as removing excess moisture from cleaned equipment prior to drying.

  • Interior lighting provides well-lit working area.

  • Exhaust blower ventilation system reduces vapor mist in cleaning chamber.

  • Electronic switching valves enable technician to instantly change modes of operation from cleaning to rinsing to filling solution tank.

  • Cabinet construction is rugged powder-coated steel.

  • Bottom of cleaning chamber and top of turntable are coated with a mold/mildew resistant, rustproof material.

  • Coating of turntable helps to minimize scratching equipment during the cleaning process.

  • Conveniently located drain (with removable, powder-coated strainer) is designed to connect to standard garden hose.

  • Four heavy-duty casters (two being lockable) provide mobility for staging equipment where needed.

  • Cleaning system is designed to fit through a standard 36" doorway for on or off site cleaning.

  • Cleaning chamber is mounted on a powder-coated steel, key lockable storage cabinet ideal for securing supplies and tools.


Equipment Specifications

  • Overall dimensions approximately: 35" wide x 35" deep x 80" high

  • Weight is approximately: 562 pounds

  • Power requirements: two separate 20A, 115V, 60Hz. GFI circuits

  • Air requirements:Dry compressed Air approximately 10cfm @ 50psi

  • Water requirements: Standard cold tap water with 3/4" hose connection

  • Drain requirements: 3/4" garden hose, gravity fed

  • Construction: 11, 14 and 16 gauge cold rolled steel with powder-coat finish


  2002 Odell Electronics Cleaning Stations. All images and Information contained in this and the following pages are the property of Odell Electronics Cleaning Stations.

This site is Hosted and Designed by North Coast Web and Design